DARSONVAL High Frequency Wand

• Input Voltage - 100 – 240 V AC (50/60 Hz)
• Power Consumption ~ 10 – 20 W
  Output Voltage Up to 35,000 V (peak high-frequency voltage)
• Current~ 0.27 A
  Operating Frequency - High-frequency (multiple kHz / MHz depending on design)
• Gas Tube Type - Neon and/or argon glass tubes (neon = red/orange, argon = violet)
• Number of Electrodes / Tubes - 4 (or more, interchangeable types)
• Modes / Levels - Multi-level intensity, e.g. 9 levels (adjustable)
• Functions - Acne treatment, skin rejuvenation, wrinkle reduction, pore tightening, antibacterial / ozone generation
• Safety Features - Auto shut-off, insulation, overheat protection, current limiting
• Body Material - ABS plastic + metal contacts
• Usage Duration - 10–15 minutes per session, 2–3 times per week (recommended)
• Warranty - 1 year (for many models)
• Weight / Dimensions ~ 1.7 lb / 7.9 × 4 × 11.8 in (для аналогичной модели)

Cleanse your skin
Wash your face with a gentle cleanser and pat dry before starting the treatment.

🌿 1. Mushroom Electrode (Universal)

Purpose:

• General facial and body care;
• Tightens pores and improves blood circulation;
• Helps fight acne and post-acne marks;
• Speeds up healing of minor inflammations.

How to use:

• Cleanse and dry your skin (you can apply a bit of talc or use a dry tissue to reduce friction).
• Turn on the device and set it to a low intensity.
• Move the electrode along facial massage lines: from the center of the forehead to the temples, from the nose to the ears, from the chin to the jawline.
  
  Duration: 5–10 minutes.

📅 Course: 10–15 sessions, once a day or every other day

🌿 2. Point (Drop-shaped) Electrode

Purpose:

• Spot treatment for acne, pimples, and cold sores;
• Local disinfection of minor wounds.
  

How to use:

• Do not slide over the skin — just touch the affected spot lightly.
• Treat each area for 2–5 seconds.
• After the session, you can apply an antiseptic or soothing serum.
  ⚠️ Do not use on open wounds or mucous membranes.

🌿 3. Comb Electrode

Purpose:

• Strengthens hair follicles;
• Reduces hair loss;
• Stimulates scalp circulation.

How to use:

• Hair should be clean and completely dry.
• Slowly comb through the scalp from the forehead to the back of the head.
• You can apply tonics or serums for hair growth after the session.

📅 Course: 15–20 sessions every other day for 10–15 minutes each.

🌿 4. Leaf (Flat) Electrode

Purpose:

• For body treatment (back, arms, legs);
• Improves skin tone, relieves tension;
• Helps reduce cellulite.

How to use:

• Move the electrode smoothly over the skin in massaging motions.
• Focus on large muscle areas and follow natural massage lines.
  

Duration: 10–15 minutes.

💡 Works well with anti-cellulite creams (apply after the session).

-------------------

🟣 1. Direct Method (Contact Technique)
Essence:
The electrode is pressed tightly against the skin and glides smoothly without lifting off.
The current passes through the upper layers of the skin, improving microcirculation and metabolism.
Sensation:
Gentle warmth, light tingling, or vibration — completely painless.
Used for:
Facial care: acne, post-acne, fine lines;
Pore tightening and evening skin tone;
Anti-aging treatments;
Oily and problematic skin care.
💡 Tip: You can apply a light layer of talc before the session to help the electrode glide smoothly and avoid sticking.

🟣 2. Indirect or Non-Contact Method
Essence:
The electrode does not touch the skin — it stays about 3–5 mm away.
The air between the electrode and skin gets ionized, creating a soft glow and mild discharge.
Sensation:
Gentle tingling or “sparkling” sensation, sometimes mild warmth.
Usually performed at a slightly higher intensity than the contact method.
Used for:
Surface disinfection of the skin;
Stimulating cell renewal and metabolism;
Treating inflamed or painful acne without touching the skin.
💡 Tip: For inflamed or sensitive skin, this is the preferred method — no direct contact or friction.

🟣 3. Sparking or Ozone Discharge Method
Essence:
The electrode is held at a distance of up to 1 cm from the skin.
A visible spark discharge appears between the electrode and the skin, releasing ozone.
This provides an antiseptic, drying, and cauterizing effect.
Sensation:
A stronger tingling or slight burning sensation at the treated point.
Used for:
Spot cauterization of acne, cold sores, or boils;
Sterilizing and drying oily skin areas;
Reducing inflammation.

💡 Important:
Do not hold the electrode too close — it can burn the skin.
Avoid on thin or highly sensitive skin.
Treat each spot for only 2–3 seconds.

⚠️ General Safety Guidelines
Do not use on wet skin, mucous membranes, or near the eyes.
Avoid use during pregnancy, with pacemakers, arrhythmia, or cancer.
Remove all metal jewelry before the session.
Avoid washing your face with cold water immediately after the procedure.

We offer free tracked shipping for all orders. Order processing takes 1-3 business days before shipment. Once your item/s is dispatched, the estimated delivery time is:

• USA: 3-8 business days
• Rest of world: contact us

We stand behind our products. If you're not satisfied within 30 days of purchase, we'll refund your money, no questions asked. Additionally, we offer a 1-year guarantee against product defects.